cluster

Displays cluster information (cluster configuration parameters, members, status, etc.)

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

show cluster [configuration|history|members|status]

show cluster [configuration|history {on <DEVICE-NAME>}|members {detail}|status]

Parameters

show cluster [configuration|history {on <DEVICE-NAME>}|members {detail}|status]


cluster	Displays cluster information
configuration	Displays cluster configuration details
history on <DEVICE-NAME>	Displays cluster history status <DEVICE-NAME> – Optional. Specify the controller or access point name. If the device name is not specified, the system displays all cluster history.
members {detail}	Displays cluster members configured on the logged device detail – Optional. Displays detailed information of known cluster members
status	Displays cluster status

Examples

nx9500-6C8809(config)#show cluster configuration
Cluster Configuration Information
 Name                         : SiteConRFS6k
 Configured Mode              : Active
 Master Priority              : 128
 Force configured state       : Disabled
 Force configured state delay : 5 minutes
 Handle STP                   : Disabled
 Radius Counter DB Sync Time  : 5 minutes
nx9500-6C8809(config)#

nx9500-6C8809(config)#show cluster members detail
--------------------------------------------------------------------------------
-------
ID MAC MODE AP COUNT AAP COUNT AP LICENSE AAP
LICENSE VERSION
--------------------------------------------------------------------------------
-------
70.38.06.49 00-15-70-38-06-49 Active 0 1 0 0
5.9.2.0-007D
70.81.74.2D 00-15-70-81-74-2D Active 0 0 1 0
9.2.0-007D
--------------------------------------------------------------------------------
-------
nx9500-6C8809(config)#

nx9500-6C8809(config)#show cluster status
Cluster Runtime Information
Protocol version             : 1
Cluster operational state    : active
AP license                   : 0
AAP license                  : 0
AP count                     : 0
AAP count                    : 0
Max AP adoption capacity     : 1024
Number of connected member(s): 0
nx9500-6C8809(config)#